CASE ENG 4SA 84-99NAT

Varastossa

Tuotekoodi

09200158

Special Price 2 447,00 € Regular Price 2 796,00 €

Lähetämme: 24.04.2026–27.04.2026 välisenä aikana

Toimitus osoitteeseen

Laske toimituskulut

Maa

Osavaltio/provinssi

Määrä

Laske osamaksu

▼

Valitse tarjoaja

Käsiraha

€

Lainasumma: –

Maksukausi

24 kuukautta

3 kuukautta 60 kuukautta

Kuukausierä – €

Tuotteen hinta –

Lainasumma –

Kokonaissumma –

Korkokulut –

Korkoprosentti –

Sopimusmaksu –

Hallintomaksu –

Enimmäislainasumma –

Laskuri tiedot ovat suuntaa-antavia. Lopullinen tarjous riippuu tarjoajan ehdoista ja luottopäätöksestä.

Designed for high performance engines with cylinder bores 4.000"
Cam chest is moved outward 0.250" to allow crankcases to handle large cylinder bore sizes
Clearanced for strokes as long as 5.000"
Relocated cam chest oil pick-up increases gear case scavenging and virtually eliminates oil carry-over at sustained high speeds
Machined to accept the stock oil filter assembly used on '92-'99 Big Twins
A ported breather passageway and a machined breather window allows the air/oil mist to flow from the flywheel cavity to the cam chest of the engine with the least possible restriction
Crankcase venting can be achieved via two crankcase breathers, the cylinder heads, or both; S&S recommends using both crankcase breathers in engines larger than 95"
Deck height is 5.875"
Made in the USA
Machined for installation of a crank position sensor which allows the cases to be used in EFI applications and also allows easy installation of S&S IST Ignition and VFI Fuel Injection; a plug kit is included for applications that do not use a crank position sensor.
All S&S crankcases manufactured after June 1, '08 do not have case interlock groove and ring and do not use case alignment studs. Case mating surface is flat, and cases are aligned with alignment dowels.

Brand

S&S CYCLE

Vendor Part Number

31-0047

Color/Finish

Natural

Model

Special Application

Product Name

Engine Case

Units

Kit